Tyre repair equipment of Automatic Touchiless tire Changer CE

1.Automatic touchless 2.QX system eliminate the traditional tire bar. 3.Special for low profiled and Run Flat UHP tires

 Tyre repair equipment of tire Changer

Automatic Touchless Tire changer (low-profile)CROSSAGE

Feature:

1.Mounting/dismounting procedures for conventional,low profiled and Run Flat UHP tires remain exactly the same as those normally performed by the tire shop.The advantage is to avoid using the traditional tire bar

2.Rim clamping is made through a cone and a quick ring nut.The absence of a turnable plate removes the restraint of the clamping range,normally found on conventional rim-clamp tire changers.

 3.The bead breaker arm with disk helps loosening the bead in a more senstive,regular and effective way than the tranditional bead breaker shovel.The mechanical arm-tilting system gives the chance to place the arm with disk in the right position to loosen the lower bead,as well.

4.The leverless mounting/demounting system QX,exclusively patented by GIULIANO,eliminate the traditional tire bar,but leaves the whole tire mounting-demounting procedure exactly as it is always been for the operator.Powerful and easy to use.It's made by a lever,operated by an air cylinder,whose movement is exactly the same of the old,traditional tire bar,the difference being that its power is not the one of the operator.but the power of the air cylinder at 10 BARs pressure.It's simple and clear how much is the saving of energy and effort for the operator.

5.The pedal box is placed at the side of the main chassy,in order to optimize working space and guarantee the best working position to the operator.All controls,both by hand and by pedal,are extremely easy to reach and work on,from the same working position.

Technical specification:

Rim clamping:10"-34"

Max.wheel diameter: 1200mm 47"

Max.wheel width: 406mm 16"

Wheel lift capacity: 80kg

Bead breaker force: 12037N

Rotating speed: 7-14rpm

Power supply: 400V 3ph

Motor power: 0.8-1.1kw

Max.spindle torque: 1200Nm

Inflating pressure limiting device max.: 3.5bar

Net weight: 375kg

  

Tyre repair equipment of Automatic Touchiless tire Changer CE